Sperry Marine BME X-Band Motor Diagnostic
It was reported that radar stop turning during transmission. Checked scanner on/off switch it was in on position. Go to scanner and open up the upmast gearbox with build in transceiver. Heard a squirking sound from motor drive pcb. Carry out replacement of both motor and motor drive pcb. Checked the motor drive pcb and […]
JRC ECDIS parts for sale
We are please to offer JRC ECDIS spare parts in good working condition.It was installed on one multipurpose cargo vessel, as only one 19′ JRC ECDIS onboard, We have removed the old JRC ecdis and replaced with a Danelec DM700 ECDIS master and backup station.Crew was happy to use the new ECDIS run on Linux […]
JMA 9110 X-band 10KW radar installed on a container vessel.
2nd officer happy using JRC radar Setting to work Engineer testing the radar
Kelvin Hughes New X and S band RADAR Type approved Certificate with Chart Option
NEW ECDIS STANDARDS
Asian cable ship

Spotted this ship at loyang offshore supply base. I still remember when this ship was first built around year 2000 at Jurong shipyard, I was there to commission the Integrated Bridge System(IBS) delivered by Kongsberg Marinetime Singapore. It took me 3 months to fully commission it. A very tough and fulfilling assignment.
Sperry Marine X-band 25Kw Bulkhead radar

This is a container ship equipped with Bulkhead(Downmast) Transceiver X-band 25KW. The crew has complained that the echo received on the radar screen was very weak, a sun can be observed from near range. Most electronic parts including magnetron, modulator, receiver pcb, limiter, TR cell…etc has been replaced by technician in other port but problem still remain the same. […]
Western Anchorage
I was attending to annual performance test for SVDR. Today is a nice weather.Lots of ship anchored here.
Uni-Safe BNWAS
Another type of BNWAS made in Denmark. It was type approved for DNV, LR, BV, RINA, ABS, GL, NKK, RS, CCS and KR classification. As a system integrator, we had tested this piece of equipment and found quite easy and straight forward to installation on board ship. It comes with a 24 months warranty, so […]
RS232 Pin-out and self make cable
The purpose of uploading the RS232 Pin-out is for anyone who wish to use laptop or notebook to connect DB9 pin D-Sub for hyper terminal to check/troubleshoot for NMEA serial signal availability or simulate NMEA out from latop to external device.For new laptop which does not have DB9pin as serial com port, purchase of USB to Serial […]